Pstn Connection - BT Cordless Headset H55 Quick Setup And User Manual

PSTN connection

Connect your headset directly to a telephone line
(to receive calls only)
Connect one end to
the PSTN socket on
the headset base and
the other to your
telephone wall socket.
Make sure the Corded Handset Connected
switch on the side of the base is set to NO, see
page 38. With this set-up you will only be able to
receive calls using your headset. If you also want
to make calls with your headset you will need to
connect to the telephone line via a phone, see
page 8 for instructions.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Quick set-up guide Quick set-up guide
After charging your headset
for the first time, subsequent
charging time for the battery is
approximately 2 hours.
The charge capacity of
rechargeable batteries will go
down over time, which will
reduce the talk and standby
times. Eventually they'll
need replacing. For details
on how to get a replacement
battery, call the Helpline on
0800 218 2182*. Before
removing the battery pack
for replacement, remove any
headset attachment (earbud
excluded) first.
Using your headset on a
broadband line?
If so, you need to fit an ADSL
microfilter between the phone
line cord and the phone
socket. You can get BT ADSL
microfilters from bt.com/shop
If you use BT Infinity you will not
need to use an ADSL microfilter.
For other types of broadband,
please check with your provider
if a microfilter is required.
7 7