Behind-The-Neck Band; To Attach The Neck Band To The Headset - BT Cordless Headset H55 Quick Setup And User Manual

36 Using the headset attachments
To wear on your other ear,
remove the headset from the
neck band (see page 37) and
then attach it to the other side
of the neck band by following
the steps opposite.

Behind-the-neck band

To attach the neck band to the headset

1. Remove any headset attachment connected to the
headset earpiece (except the earbud).
2. Insert the earpiece into the neck band ring as
shown in diagram below.
3. Push the earpiece towards the neck band ring until
it clicks into place as shown in diagram below.
4. Place the neck band around your neck with the
padded neck band rings over your ears.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp