BT Cordless Headset H55 Quick Setup And User Manual page 6

6 6 Quick set-up guide Quick set-up guide
Please note that new
rechargeable batteries don't
reach full capacity until they've
been in normal use for several
days.
Battery low warning
The red light on the top of
the headset will flash every
10 seconds when the headset
is not mounted on the base
to indicate that the battery is
low. If the battery completely
runs out the light will turn off
altogether. You must recharge
the battery by mounting the
headset on the base before
you can use the headset again.
Battery performance
To keep the battery in the best
condition, leave the headset
off the base for a few hours at
a time.
Running the batteries right
down at least once a week
will help them last as long as
possible.
3
1. Insert the headset into the magnetic charging
mount on the base and leave to charge for at least
3 hours before use. The
to indicate that the battery is charging.
If you ever need to remove the battery pack,
simply insert your fingernail into the grooves on
the side and pull the battery pack out.
4
You can use your headset to receive calls through
your telephone line with or without connecting it
to a phone. However, to make a call you will need
to connect to a phone first. You can also connect
to a computer to make and receive VoIP calls.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Charge
Connect the headset base
light will illuminate red