Mitsubishi Heavy Industries FDTCVA SERIES Technical Manual page 311

Model FDCVA802HESAR, 1002HESAR
Item
Power source
( 1)
Nominal cooling capacity
( 1)
Nominal heating capacity
Noise level
Exterior dimensions
Height Width Depth
Net weight
Refrigerant equipment
compressor type & Q' ty
Starting method
Crankcase heater
Heat exchanger
Refrigerant control
Refrigerant
Quantity
Refrigerant oil
Defrost control
Air handling equipment
Fan type & Q'ty
Motor
Starting method
Air flow(Standard)
Shock & vibration absorber
Safety equipment
Installation data
Refrigerant piping size
Connecting method
Drain
Insulation for piping
Accessories
Notes (1) The cooling and heating capabilities imply the values when the indoor unit of rated capacity is connected under the condition specified in ISO-T1.
(2) The refrigerant quantity in the connecting pipe is not included. Charge it additionally at the site.
(3) Values in [ ~ ] show the minimum and maximum capacities.
Model
FDCVA802HESAR
kW 20.0 [7.0~22.4]
kW 22.4 [7.6~25.0]
dB(A)
mm
1300
kg
W
kg
(Pre-charged up to the piping length of 30m)
W
CMM
Liquid line: 9.52 (3/8")
mm(in)
Gas line: 25.4 (1")
Reducer kit (Please see page 218), Accessory pipe (Please see page 220)
-
3 Phase, 380-415V 50Hz/380V 60Hz
57
970 370
122
GT-C5150ND79 1
Direct line start
40
Straight fin & inner grooved tubing
Electronic expansion valve
R410A
5.4
(Pre-charged up to the piping length of 30m)
1.45 (M-MA32R)
Microcomputer controlled de-icer
Propeller fan 2
120 2
Direct line start
Cooling: 150, Heating: 145
Rubber mount (for compressor)
Internal thermostat for fan motor.
Abnormal discharge temperature protection.
Liquid line: Flare piping, Gas line: Brazing
Hole for drain ( 20 6pcs.)
Necessary (both Liquid & Gas lines)
310
-
FDCVA1002HESAR
25.0 [10.6~28.0]
28.0 [9.5~31.5]
Cooling: 57, Heating: 58
1505 970 370
140
7.2
Liquid line: 12.7 (1/2")
Gas line: 25.4 (1")