To Set Oven To Start Cleaning At A Later Time - Jenn-Air EXPRESSIONS W27400 Use And Care Manual

To set oven to start cleaning at a later time
1-3. Follow Steps 1-3 in previous section on page 29.
4. Touch Stop Time Pad.
Indicator Words STOP TIME will flash in the Display. The IndicatorWord CLEAN
and the calculated stop time will also appear in Display.
Note WW27430 Owners:The appropriateletter (U-upperoven;L-loweroven) and
OVEN will also flash.
5. Touch the appropriate number pads to enter stop time,
A stop time can only be acceptedfor later in the day. If an unacceptable stop time
is entered, "Err" will flash briefly in the Display and then Display will return to
previous acceptable Stop Time.
Example: If at 9 o'clock you set the oven to clean for three hours, the calculated
stop time would be "12:00". The Display would show:
12:00
s_ _E
If you want the stop time to be 1 o'clock, touch the number pads "1,0,0". Five
seconds later, the Display would show Start Time:
I0:00 I
DELAY _rARr _E _
After five seconds, the Display will return to current time of day, thus showing:
9:00
The LOCK Indicator Word will come on and the cooling fan will go off as soon as
the oven door has latched.
When the oven begins to clean, the Indicator Word ON and the cooling fan will
come on and the Indicator Word DELAY will go off.
When the clean time has been completed, the Indicator Words CLEAN and ON
will go off. The IndicatorWord LOCK and the cooling fan will remain on until the
oven has cooled down and the door has unlocked.
3O