To Set Oven To Start At Future Time And Shut Off Automatically - Jenn-Air EXPRESSIONS W27400 Use And Care Manual

To set oven to start at future time and shut off automatically
1-4. FollowprecedingSteps1-4, on page 12.
5. TouchStop Time Pad.
Indicator Words STOP and TIME will flash. Display will show the calculated
stop time based on current time of day and cook time. Note WW27438 Owners:
The appropriateletter (U - upper oven; L - tower oven) and OVEN will also flash.
6. Touch the appropriate number pads to enter desired stop time.
A stop time can only be acceptedfor later in the day. Note: Since food continues
to cook if left in the oven, it is suggestedthat the clock controls be used primarily
to start the ovenwhen no one is in the kitchen. Provisionsshould be madeto have
the food removed as soon as the chime has sounded.
Example: If at 10 o'clockyou set the oven for 350°convection bakingand 2 hours
and 30 minutes cooking time, the calculated stop time would be "12:30". The
Displaywould show:
If you want the stop time to be 1 o'clock, touch the number pads "1,0,0". Five
seconds later, the Displaywill briefly show the start time:
10::90 s.o o°
D_AySTART 1]_
After five seconds, the display will return to current time of day, thus showing:
/ 0:00 o°
_Ay _ED
Atthe end of thedelayed period,the DELAY IndicatorWordwill go off and the oven
will begin to heat. 100° will be shown. As the oven heats,the Display will show
a rise in increments of 5° until programmed temperature is reached.
At the end of programmedCook Time, the oven will shut off automaticallyand a
"chime"will be heard four times and "End" will appear in the Display. If oven is
not cancelled, "End"will remain in the Displayand there will be one chime every
minute for ten minutes.
IMPORTANT
• Note WW27430Owners: Clock controlledbakingcan be usedwith only one oven
at a time. To program,first set the bake or convectbake or convect roast function
for the desired oven, then set the cook time. If one oven is set for clock controlled
baking, the other oven cannot be set to self-clean.
• To recall time function programmed: Touch the appropriatetime pad.
• To canceltimed function only: Hold Cook Time Pad for four seconds. This will
only cancel cook time and stop time, not programmedbake mode.
• If more than five seconds elapse between touching a function pad and touching
appropriatenumber pads, the oven is not set and Display will return to previous
Display.
13