Steps To Follow For Self-Cleaning Process; To Set Oven To Start Cleaning Immediately - Jenn-Air EXPRESSIONS W27400 Use And Care Manual

*Omit steps 4 & 5 if you wish cleaning to begin immediately.
To set oven to start cleaning immediately
1. Close the oven door.
2. Touch Clean Pad of oven to be cleaned.
Indicator Words Clean Time will flash and Display will show " HR : __ __".
NoteWW27430 Owners:The appropriateletter (U-upperoven; L-loweroven) and
OVEN will also flash.
3. Touch the appropriate number pad(s).
The first number pad touched will enter "3:00" in the Displayfor an average soiled
oven. The cleaningtime can be varied dependingon the amount of soil. Set "2:00"
for light soil or "4:00" for heavy soil.
Note: If more than five seconds elapse between touching a Clean Pad and
touching a numberpad, the oven is notset and time of day will automatically return
to the Display.
Example; If at 9 o'clock you selected to self-clean your oven for 3 hours, the
Display will show:
9 ".'00 ]
_ME
Five seconds after entering "3:00" or a different time, the oven door will start to
automatically latch and the cooling fan will come on. The LOCK Indicator Word
will come on when the door is latched.
Note: If oven door was left open, "door" will flash in Display and a signa_will
continuously beep until the door is closed and the Clean Pad is touched.
The Indicator Word ON comes on when the door is latched and will remain until
the clean temperature is reached. The Indicator Word ON will cycle with the
elements to maintain the clean temperature.
When theclean function has been completed, the IndicatorWords CLEAN and ON
will go off. The IndicatorWord LOCK and the cooling fan will remain on until the
oven has cooled down and the door has unlocked.
29