When electrical power is supplied or after power interruption, the last clock time
displayecLbeforepower was interrupted will flash. Time will advance and continue to
flash until clock is reset.
i, TOU_ _OCk PaCL
(2:To_hbpOOpt_te.number
pads, 1
To set Time of Day
1. Touch Clock Pad.
IndicatorwordTIME will flashand time digits willappear in the Display. (If more
than five seconds elapse between touching Clock Pad and touching a number
pad, the Clock Pad must be touched again in order to set clock.)
2. Touch the appropriate number pads until correct time of day appears in Display.
Note: Five seconds after touching the number pads, the time of day wil(
automatically be entered.
IMPORTANT
• To recall time of day when another time function is showing: Touch Clock Pad.
• Clock time cannot be changed when oven has been programmed for Timed
Bake, Timed Convect Bake,Timed Convect Roastor Self-clean. Cancel program
before reprogramming clock.
10