Operation; Original Set Indicator; Warnings And Actions To Take - Canon DU7-1101-000 Service Manual

CHAPTER 1 GENERAL DESCRIPTION
IV . OPERATION
A.

Original Set Indicator

The Original Set indicator turns on when an original is placed on the original tray, and flashes when an
original jams.
Original Set indicator
B.

Warnings and Actions to Take

Suspect a jam if the Original Set indicator starts to flash while an original is being fed. Perform the
following steps for correction:
1) Remove all originals from the original tray.
2) Open the upper cover, and remove the jam, if any.
3) Open the ADF, and remove the original, if any, from the copyboard.
4) Put the originals in correct order, and set the stack in the ADF.
1-6
COPYRIGHT © 1999 CANON INC.
Figure 1-401
CANON ADF FOR iR600 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)