Jenn-Air W2780 Use And Care Manual page 21

After 3 seconds the Display will show probe temperature or 095 °, whichever is
higher. Indicator Words CONV and BAKE will flash.
I ,0 I .LILt = .,,
6. Touch Bake Pad or Convection Bake Pad.
Indicator Words BAKE or CONV BAKE will flash and Display will show 3 dashes.
7. Turn Set Dial until desired oven temperature appears in the Display.
If the Set Dial is turned one click, 325° will be shown. The Set Dial can be turned in
either direction until the desired temperature appears in the Display.
EXAMPLE: If at 10 o'clock you set the oven for a probe temperature and to convect
bake at 350°, after 3 seconds the Display will show:
I i .mmioqs °
ILl. till =, ;,
When selected temperature has been reached, the oven will shut off and the signal
will beep 3 times. If the probe is not removed, the actual probe temperature will be
in the Display. The temperature will flash and the signal will beep continuously until
the probe is removed.
NOTE: Once selected internal temperature has been reached, unplug the probe
from the oven and remove food immediately to prevent overcooking. Hold plug with
potholder.
IMPORTANT: The probe must be unplugged and removed from oven when it is not
being used. If probe is left plugged in oven and Probe feature is not programmed,
the signal will beep and temperature will flash continuously. Be sure metal cover is
over receptacle when Probe feature is not being used.
To recall
oven temperature
selected: Touch the appropriate Bake Pad. The
temperature will be displayed briefly before returning to probe temperature.
To change oven temperature set: Touch appropriate pad and turn Set Dial to new
desiredtemperature.
To use Probe feature to start at future time and shut off automatically:
IMPORTANT: Both estimated cook time and stop time must be set or oven will start
immediately. Therefore, follow all nine steps.
1. Insert probe.
2. Touch Probe Pad.
3. Turn Set Dial to desired temperature.
4. Touch Bake Pad or Convection Bake Pad.
5. Turn Set Dial to desired temperature.
6. Touch CookTime Pad.
Indicator Words OVEN and TIME will flash and Display will show "0 HR :00".
NOTE WW2780 OWNERS: The appropriate number (1-upper oven; 2-lower oven)
will also flash.
7. Turn Set Dial to enter cooking hours in 5 minute increments.
Hours are to left of colon and minute to right of colon.
(Allowable range is 5 minutes to 11 hours and 50 minutes.)
23