Event Action Setup; Alarm In Event Action (Record) Setup Screen; Figure 44 - Alarm In Event Action (Record) Setup Screen - ADEMCO AHDR4 User Manual

User' s Manual
You can set the amount of time to record prior to the event by adjusting the Dwell. You can set
the Dwell from 1 to 300 seconds.
NOTE: When the DVR is in the Time-Lapse mode, it ignores the pre-event settings and
follows the time-lapse settings.

Event Action Setup

Highlight the Alarm In Event Action, Motion Detector Event Action, or Video Loss Event
Action in the Main menu. The following Event Action setup screens will appear.

Alarm In Event Action (Record) Setup Screen

The DVR can be set to react to events differently. Each sensor can be assigned a schedule,
camera, recording speed, video quality and dwell time.
Figure 44 — Alarm In Event Action (Record) setup screen.
Highlight the Sched box and press the
button. A schedule screen appears. Set the schedule
as described earlier.
Highlight the Camera box and press the
button. A camera selection screen appears. Select
the camera number you would like to associate with the sensor.
NOTE: You can associate multiple cameras with a sensor.
Highlight the Speed box and select number of images per second you would like to record
from the drop-down menu.
36