Pre-Event Recording Setup Screen; Figure 43 - Pre-Event Record Setup Screen - ADEMCO AHDR4 User Manual

There are several ways to set recording times:
• You can highlight an individual block and toggle it On or Off by pressing the
• You can change a 30-minute segment for all days by placing the cursor on the time line and
pressing the
• You can change an entire day by placing the cursor on the day of the week and pressing the
button to toggle the day On or Off.
• You can change the entire calendar by placing the cursor in the upper left-hand box (above
"S" and to the left of the time line) and pressing the
On and Off.
NOTE: The Holiday (H) schedule applies to the dates you established as holidays when
setting Date/Time.
You can save your changes by highlighting OK and pressing the
exits the screen without saving the changes.

Pre-Event Recording Setup Screen

When the DVR is in the Event Record mode it is possible to have it record images before the
event occurs. The Pre-Event Record screen allows you to define how to handle pre-event
recording.
You can turn individual cameras On or Off for pre-event recording. The image speed can be set
from 0.1 to 60 ips (50 ips PAL), and image quality can be selectable from High, Standard and
Low.
button to toggle the segment On or Off.
Figure 43 — Pre-Event Record Setup screen.
Digital Video Recorder
button to toggle the entire calendar
button . Selecting Cancel
button.
35