Initial Unit Setup; Password; Figure 19 - Admin Password Screen - ADEMCO AHDR4 User Manual

CLOCK displays when the digits are displaying the current time.
PB displays when video is being played back and the digits are displaying the time of the
recording.
REMAIN displays when the digits are displaying the remaining hard disk drive
capacity.
ALARM displays when any camera is in the event-driven recording mode.
The bell icon displays during alarm activation.
These light when the display is in the remaining disk capacity mode. TB = TeraBytes,
GB = GigaBytes and MB = MegaBytes.
This icon displays when video is being played backward at fast speed.
This icon displays when video is being played backward at regular speed.
This icon displays when video is paused.
This icon displays when video is being played forward at regular speed.
This icon displays when video is being played forward at fast speed.
The network icon displays when the unit is networked either via Ethernet or modem.
DX displays when the DVR is operating in the Duplex mode.
The disk icon displays when data is being backed up using the USB port.
R-REC displays when the DVR is in the Repeat Record mode. The DVR will continue
recording when the hard disk drive is full by recording over the oldest video.

Initial Unit Setup

Before using your DVR for the first time, you will want to establish the initial settings. This
includes items such as time and date, display language, camera, audio, remote control, record
mode, network and password. Your DVR can be set up using various screens and dialog boxes.

Password

Press the button to enter the setup screens. The Admin Password screen appears.
MENU
The digits display Time, Date and Remaining Capacity.
Figure 19 — Admin Password screen.
Digital Video Recorder
15