Alarm Button; Menu Button; Ptz Button; Camera Buttons (1 To 16) - ADEMCO AHDR4 User Manual

User' s Manual

ALARM Button

The ALARM button has two functions. First, it will reset the DVR's outputs including the
internal buzzer during an alarm. Second, it will display the event log when you are in the live
monitoring mode unless there is an active alarm. This operation can be user password
protected.

MENU Button

Pressing the
MENU
administrator password to access the Quick Setup. Pressing the button also closes the current
menu or setup dialog box.

PTZ Button

Pressing the PTZ button opens a Pan/Tilt/Zoom screen, which allows you to control properly
configured cameras.

Camera Buttons (1 to 16)

Pressing the individual camera buttons will cause the selected camera to display full screen.
They are also used to enter passwords.

DISPLAY Button

Pressing the
DISPLAY
are: full, 4x4, 3x3, 2x2 and PIP.

SEQUENCE Button

When in the live mode, pressing the
sequentially. When in one of the multi-view formats, pressing this button will cause the DVR to
sequence cameras in two sequence modes: "Page" and "Cameo". In the Page mode, the DVR
sequences through user-defined screen layouts (pages). In the Cameo mode, the bottom, right
screen to display live cameras sequentially. Pressing the
Sequence mode will exit the Sequence mode.

FREEZE Button

Pressing the FREEZE

COUNTER Button

Pressing the COUNTER
capacity on the front panel display.
12
button enters the Quick Setup screen. You will need to enter the
button toggles between different display formats. The available formats
SEQUENCE
button freezes the current live screen.
button switches between displaying the time and the remaining storage
button displays another full live channel
SEQUENCE
button while in the