Date/Time Setup; Figure 26 - Date/Time Setup Screen - ADEMCO AHDR4 User Manual

User' s Manual
Once you have entered your title, highlight Close and press the
button.
Highlight the box beside Unit ID and press the
button. Change the number by highlighting it
and using the Up and Down arrow buttons to increase and decrease the number.
After you have created a title, assigned a unit ID number and selected a language, you can save
your changes by highlighting OK and pressing the button. Selecting Cancel exits the screen
without saving the changes.

Date/Time Setup

Highlight Date/Time in the Main Menu and press the button. The Date/Time setup screen
appears.
Figure 26 — Date/Time setup screen.
CAUTION: If you set a date and time that is older than some of your recorded
images, any images with dates and times later than the new setting will be
deleted.
Highlight the first box beside Date/Time and press the
button. The individual sections of
the date highlight. Use the Up and Down arrow buttons to change the number. Use the Left
and Right arrow buttons to move between month, date and year. Once you have the correct date,
press the button.
NOTE: The clock will not start running until you have restarted the unit, so you may
wish to set the time last.
Highlight the box beside Time Zone and press the
button. Select the time zone you are in
from the list and press the button.
20