D-Link DSM-600 User Manual page 11

Network storage enclosure

Hide thumbs Also See for DSM-600:

Table of Contents

Section - Installation

G. Connect the power adapter to the power receptor on the back panel. Then

plug the other end of the power adapter into a wall outlet or power strip.

After pressing the power button, the power LED will blink as the device is

starting. The power LED will become solid when the DSM-600 is ready for

use.

Note: When you first power on and access the web-based configuration, the DSM-600 will offer to format your hard drive if

it is unformatted. This process may take several minutes depending on the size of your hard drive. During this process, the

power LED will blink. Do not power the unit off during this process. Once the power LED is solid, you may then access the

web- based configuration of the DSM-600.

D-Link DSM-600 User Manual

Table of Contents