Brother FAX-545 Service Manual page 121

Error Code
(Hex)
BA-BD Not used.
BE Scan starting edge
detection error.
BF Abnormal light intensity
in the LED array.
C0-CF Not used.
D* Modem error.
E0 Non-input of serial
number/Customized code.
E1-E5 Not used.
E6 Write error in EEPROM.
E7 Not used.
E8 Data scanning error during
transmission.
E9 Not used.
EA Document removed at
phase B.
EB-F2 Not used.
F3, F5 Internal software error.
F4-FE Not used.
FF Memory management
error.
Symptom
9 - 7
Probable Cause
White-level reference
film on the top cover
stained
CIS defective
CIS flat cable broken
or not connected
Main PCB defective
CIS defective
Main PCB defective
Serial number or
customized code is not
input
Main PCB defective
CIS defective
Main PCB defective
Document front sensor
actuator caught on the
surrounding parts
Main PCB defective
Main PCB defective
Main PCB defective
Solution
Replace the white-level
reference film.
Replace the CIS unit.
Correct the cable
connection.
Replace the CIS unit.
Replace the main PCB.
Replace the CIS unit.
Replace the main PCB.
Input the serial number
(function code 80) or
customized code
(function code 74)
Replace the main PCB.
Replace the CIS unit.
Replace the main PCB.
Correct the surrounding
parts on which the
actuator caught.
Replace the main PCB.
Replace the main PCB.
Replace the main PCB.
Confidential