Cis Scanner Area Setting (Function Code 55); Eeprom Customizing (Function Code 74); Cis Scanner Area Setting; Eeprom Customizing - Brother FAX-545 Service Manual

8.4.12 CIS Scanner Area Setting (Function code 55)

Function
The machine sets the CIS scanner area and stores it into the EEPROM.
Operating Procedure
(1) Press the 5 key twice in the initial stage of the maintenance mode.
The "SCANNER AREA SET" and "WHITE LEVEL INIT" will appear on the LCD in this
order.
The machine checks and sets the area to be scanned.
If no error is noted, the machine returns to the initial stage of the maintenance mode.
If any error is noted, the "SCANNER ERROR" will appear on the LCD. To return the machine
to the initial stage of the maintenance mode, press the Stop/Exit key.

8.4.13 EEPROM Customizing (Function code 74)

Function
This function allows you to customize the EEPROM according to language, function settings, and
firmware switch settings. Customizing codes come with the ROM update information provided by
Brother Industries. (See
NOTE: If you replace the main PCB, be sure to carry out this procedure.
Operating Procedure
(1) Press the 7 and 4 keys in this order in the initial stage of the maintenance mode.
The current customizing code (e.g., 2004 in the case of FAX-T106 U.K. model) appears.
(2) Enter the desired customizing code (e.g., 2003 in the case of FAX-T106 German model).
The newly entered code appears.
NOTE: If a wrong 4-digit code is entered, the machine will malfunction.
(3) Press the Fax Start key.
The machine saves the setting and returns to the initial stage of the maintenance mode.
If you press the Stop/Exit key or no keys are pressed for one minute in the above procedure,
the machine stops the procedure and returns to the initial stage of the maintenance mode.
Appendix 3.)
8 - 1 9 Confidential