4.4.5
Installation
Installation
1. Place the component on the DIN rail.
2. Snap the component on to the DIN rail. Make sure that the mounting slides at the rear
3. You can now move the component on the DIN rail to the left or to the right to its final
Removal
Figure 4-8
Equipment Manual for Control Units and Additional System Components
Equipment Manual, (GH1), 04.2004 Edition, 6SL3097-2AH00-0BP0
latch into place.
position.
Releasing the component from a DIN rail
Sensor System Connection
4.4 Sensor Module Cabinet 20 (SMC20)
2. Pull the component forward
Mounting slides
1. Push the lug down
4-17