Download Print this page

Operating Instructions - Vent-a-Hood RM1000 Owner And Maintenance Manual

Range hoods models equipped with external blower

Advertisement

TO REDUCE THE RISK OF FIRE, AND TO PROPERLY EXHAUST
AIR, BE SURE TO DUCT EXHAUST AIR OUTSIDE. DO NOT VENT
EXHAUST AIR INTO SPACES WITHIN WALLS OR CEILINGS, OR
INTO ATTICS, CRAWL SPACES, OR GARAGES.
FOR GENERAL VENTILATION USE ONLY. DO NOT USE TO
EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND
TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.
THIS MANUAL SHOULD REMAIN WITH THE HOOD
On external blower models, the user should generally start on the
lowest setting and then increase speed or turn on additional blower
motors as required.
The light switch operates halogen lights as low, off, or high, and
fluorescent lights as off or on.
Blower Off/On
Blower Off/On
Note: In order to properly capture the maximum amount of oil/grease
from cooking, the remote blower should be operated at the higher
setting - lower speeds may lower the noise level, but may not create
sufficient air flow and pressure through the filter to liquify oil/grease
properly.
Safety (Continued)
CAUTION
CAUTION
VAPORS.
WARNING
FOR FUTURE REFERENCE

Operating Instructions

Fluorescent Light Models
Speed Control
Halogen Light Models
Speed Control
Page 3
Light(s) Off/On
Lights Low/Off/High
L021

Advertisement

loading

This manual is also suitable for:

Rm1500