Advertisement
Hood Cleaning
A. Hood Canopy
Wipe down the interior and exterior of the hood as needed with a soft
cloth and warm, soapy water (liquid dish setergent is acceptable).
Do not use acids, abrasives, strong detergents, solvents, or scouring
pads.
Stainless steel should be treated with a quality stainless steel cleaner
such as Stainless Steel Magic
(Vent-A-Hood
part number SS64).
®
®
Follow all label instructions. Do not polish across the grain or in
circles.
Real brass, real copper, and hammered copper hoods will oxidize
and/or tarnish over time. Use a quality copper or brass cleaner such
as Red Bear
Copper Polish (Vent-A-Hood
part number CP101).
®
®
Follow all label instructions. Do not use acids, abrasives, strong
detergents, degreasers, solvents, or scouring pads.
B. Hood Filters
WARNING: To reduce the risk of personal injury, be sure the
blower is turned off before removing filter(s).
Vent-A-Hood
range hoods that use external/remote blower units
®
have a stainless steel baffle filter(s) located inside the hood. The
filter(s) collect oil/grease from cooking and need to be removed and
cleaned on a regular basis. To remove the filter, grasp the handles,
lift upward, and pull the bottom outward. Soak the filter(s) in warm,
soapy water or wash in a dishwasher. To reinstall the filter(s), follow
the above removel procedure in reverse.
Note: Filter elements cannot always collect 100% of the grease
from cooking. Some grease may collect behind the filter or in the
duct pipe.
WALL MOUNT SIDE VIEW
ISLAND SIDE VIEW
L021
Page 4
Advertisement
