Subscriber Registration, Authentication And Timeout Parameter Configuration - Cisco ASR 5000 Series Administration Manual

GGSN Service Configuration Procedures
Notes:
<
<
advertisements. It is measured in seconds and can be configured to any integer value from 1 to 65535. The
default is 9000.
<
before it rejects the session. It can be any integer value from 1 to 65535. The default is 3.
<
message from the mobile node. It is measured in seconds and can be configured to any integer value from 1 to
65534. The default is 600.

Subscriber Registration, Authentication and Timeout Parameter Configuration

Use the following example to configure the number of subscriber registration, authentication procedure and registration
timeout parameters for this FA service:
Notes:
<
<
can be configured to any integer value from 1 to 3. The default value is 1.
OL-22944-02
> is name of the FA service which is created to configure FA functionality.
> is the amount of time that an FA agent advertisement remains valid in the absence of further
> is the number of unanswered agent advertisements that the FA service allows during call setup
> specify the longest registration lifetime that the FA service allows in any Registration Request
> is name of the FA service which is created to configure FA functionality.
> is the number of simultaneous Mobile IP sessions that are to be supported for a single subscriber. It
Important:
The system supports multiple Mobile IP sessions per subscriber only if the
subscriber‟s mobile node has a static IP address. The system only allows a single Mobile IP session
for mobile nodes that receive a dynamically assigned home IP address.
Cisco ASR 5000 Series Gateway GPRS Support Node Administration Guide ▄
FA Services Configuration ▀