Common Gateway Acces Support Configuration Verification - Cisco ASR 5000 Series Administration Manual

GGSN Service Configuration Procedures
<

Common Gateway Acces Support Configuration Verification

Step 1
Verify that your common gateway access supprot is configured properly by entering the following command in Exec
Mode:
The output from this command should look similar to the sample shown below. In this example GGSN
service named
OL-22944-02
> is name of the GGSN service which is already created on the system.
was configured in the
Cisco ASR 5000 Series Gateway GPRS Support Node Administration Guide ▄
Common Gateway Access Support Configuration ▀
context.