Preparation
9
Adjusting the stitch position
.08
●
●
38
Switch on the machine.
Change the value for the stitch position by pressing the corresponding +/- key.
The zero position of the stitch position is in the centre of the zigzag stitch.
The stitch position can be moved to the left (negative value) or to the right
(positive value), in relation to the stitch position reference point, see Chapter
9.09 Changing the stitch position reference point.
If, after the stitch position has been entered, the seam pattern is outside the va-
lid seam area, the stitch position will be ignored during sewing.
x
4.0
s = 0.0
Fig. 9 - 08
8.0
+0.0
x
4.0
s = -2.0
s = -3.0
x
4.0
s = -3.0
x: max. zigzag stitch width
s: stitch position
x
2.0