Threading The Needle Thread / Adjusting The Needle Thread Tension - Pfaff 1114 Instruction Manual

9

Threading the needle thread / Adjusting the needle thread tension

.05
1
Fig. 9 - 05
●
Thread the machine as shown in Fig. 9-05.
●
Wind the needle thread once round the needle thread tension unit 2.
●
Adjust the needle thread tension by turning milled screw 3 and 4.
Switch off the machine!
Danger of injury due to unintentional starting of the machine!
Only operate the machine with cover 1 closed!
Danger of injury from the rotating take-up lever!
Milled screw 4 is used to adjust the thread tension during trimming.
4
3
Preparation
2
114-017
35