High-Voltage Power Supply Board (P2H/P6L) - Oki OKIPAGE 8z Service Manual
Digital led page printer
Hide thumbs
Also See for OKIPAGE 8z:
- Service handbook (127 pages) ,
- Quick setup (2 pages) ,
- Limited warranty (17 pages)
Table of Contents
Advertisement
3.3.5 High-Voltage Power Supply Board (P2H/P6L)
1.
Dismount upper cover assy. (See Section 3.3.4.)
2.
Remove three screws (1) and remove the cover (2) and draw out high-voltage power supply board (3).
3.
Disconnect all the cables (4) from high-voltage power supply board (3) and dismount high-voltage power supply
board (3).
Caution:
Note the following when assembling the high-voltage power supply board:
l
Mount the high-voltage power supply board with top cover assy removed or open.
l
Take care that cable 4 will not interfere with the paper sensor exit when it is connected.
Service Manual for OKIPAGE 8z
Chapter 3 Parts Replacement
Page: 31
Advertisement
Table of Contents
Troubleshooting
