3.3.4 Upper Cover Assy
1.
Turn off the power switch and unplug the AC cord from the AC socket.
2.
Disconnect interface cable (1).
3.
Open top cover assy (2) and dismount the image drum unit (Type 6) (3).
4.
Move paper guide (L) (4) and paper guide (R) (5) on the rear of the printer to the center.
5.
Remove two front claws of upper cover assy (6) and lift upper cover assy (6).
6.
Dismount spur gear (A) (7), guide slide (L) (8), and guide slide (R) (9).
7.
Dismount lamp (10).
Service Manual for OKIPAGE 8z
Chapter 3 Parts Replacement
Page: 30