A Blank Paper Is Output - Oki OKIPAGE 8z Service Manual
Digital led page printer
Hide thumbs
Also See for OKIPAGE 8z:
- Service handbook (127 pages) ,
- Quick setup (2 pages) ,
- Limited warranty (17 pages)
Table of Contents
Advertisement
(3) A blank paper is output
Is the LED head connected correctly.
Check the HEAD1, HEAD2 connector of the main control board.
No - Connect the LED head correctly.
Yes - Is the terminal of the EP image drum unit in correct contact with the contact plate? (See Figure 6-5 E .)
No - Contact the terminal correctly.
Yes - Replace the LED head.
Has this error been recovered?
Yes - End
Caution:
Set the LED head drive time when replacing the LED head. (See Section 4.2.1).
No - Replace the main control board or high-voltage power supply board.
Copyright 2000, Oki Data, Division of OKI America, Inc. All rights reserved. See the Oki Data Business Partner Exchange
(BPX) for any updates to this material. (http://bpx.okidata.com)
Service Manual for OKIPAGE 8z
Chapter 6 Troubleshooting Procedures
Page: 64
Advertisement
Table of Contents
Troubleshooting
