Audio Controls Audio Controls - JBL Performance AV1 User Manual

Audio Controls
AUDIO CONTROLS
Selecting the MAIN MENU AUDIO CONTROLS option opens the AUDIO CONTROLS menu, which can be used to customize the audio output
connectors. These parameter settings affect all inputs and listening modes selected, except the 5.1a BYPASS and 2CH BYPASS listening modes.
Default Possible
Parameter Value
BASS +0.0dB
TREBLE +0.0dB
TILT EQ +0.0dB
LOUDNESS OFF
BALANCE <|>
FADER <|>
AUDIO CONTROLS menu parameter descriptions begin in the next column.
Note:
Pressing and holding the S2 button while pressing and releasing
the Blue button sets the BASS, TREBLE, and TILT EQ parameters
to +0.0dB.
4-2
MAIN MENU AUDIO CONTROLS
BASS
MODE ADJUST
TREBLE
AUDIO CONTROLS
TILT EQ
SETUP
LOUDNESS
BALANCE
FADER
Settings
-6.0dB to +6.0dB
-6.0dB to +6.0dB
-3.0dB to +3.0dB
ON, OFF
L< to <|> to >R
B< to <|> to >F
-6.0 to +6.0dB
+0.0dB
+0.0dB
+0.0dB
OFF
<I>
<I>
BASS
AUDIO CONTROLS BASS
Controls the amount of low-frequency boost or cut applied to the
audio output connectors labeled Front L/R, Center and Subwoofer.
The graph shown on the left of the next page illustrates the fre-
quency response of BASS parameter settings.
TREBLE
TREBLE
AUDIO CONTROLS
Controls the amount of boost or cut applied to the audio output
connectors labeled Front L/R and Center. The Treble parameter set-
tings graph on the next page illustrates the frequency response of
TREBLE parameter settings.
JBL Performance
-6.0dB to +6.0dB
-6.0dB to +6.0dB