JBL Performance AV1 User Manual page 47

AV1
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
ANLG IN LVL
DVD1
SETUP INPUTS ANGL IN LVL
Opens the ANLG IN LVL menu, which adjusts 2-channel analog
audio input levels for the selected input. Despite attempts at stan-
dardization, analog audio sources have a wide range of levels. To
compensate for this, the AV1 allows independent input level adjust-
ment for each of its stereo analog audio input connectors. Input
level adjustment is not available for either of the 5.1-
channel analog audio input connectors.
Note:
Adjustments made on the ANLG IN LVL menu are applied to the stereo
analog audio input connector assigned for the selected input. When
another stereo analog audio input connector is assigned, these adjust-
ments are automatically applied to the new connector.
SETUP INPUT SETUP
INPUTS DVD1
SPEAKERS DVD2
REAR PANEL CONFIG SAT
DISPLAYS VCR
VOLUME CONTROLS TV
TRIGGER
CD
LOCK OPTIONS
TUNER
AUX
DVD1 INPUT SETUP DVD1 ANLG IN LVL
AUTO
NAME DVD1
MANUAL
DIGITAL IN COAX-1
ANALOG IN NONE
ANLG IN LVL AUTO
VIDEO IN S-VIDEO-1 AUTO GAIN
dB L R
COMPONENT IN 1
0
2-CH FILM
-6
-15
D 5.1 FILM
-30
FILM
-45
ADVANCED
AUTO
DVD1
SETUP INPUTS
Provides automatic adjustment of 2-channel analog audio input
levels. When set to ON, the AV1 automatically monitors and opti-
mizes input levels. When the input signal is too high, the AV1
quickly decreases input levels to avoid overload. When the input
signal is too low, the AV1 slowly increases input levels to maximize
signal-to-noise ratio and dynamic range.
When the AUTO parameter is OFF, the AV1 does not provide auto-
matic adjustment of 2-channel analog audio input levels. Rather,
input levels must be adjusted with the ANLG IN LVL MANUAL
parameter (next page).
ON
OFF
ON
+0.dB
+0.0dB
ANGL IN LVL AUTO
Setup
ON, OFF
3-9