JBL Performance AV1 User Manual page 68

Setup
CUSTOM SPEAKER SETUPS
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SUBWOOFER
FULL, 30HZ to 120Hz, THX 80Hz, NONE
SETUP SPEAKERS CUSTOM SETUP
Opens the SUBWOOFER menu, which is use to select a crossover
point for the audio output connector labeled Subwoofer. When set
to FULL, the AV1 sends a full-range audio output signal to this con-
nector. Otherwise, the AV1 activates a crossover point at the
selected setting. Choose the setting equal to the lowest setting of
the other speakers.
3-30
(continued)
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
SUBWOOFER
CUSTOM SETUP
SPEAKER SETUP
CUSTOM SETUP FRONT L/R
THX SETUP CENTER
SPEAKER DISTANCES SIDE L/R
REAR L/R
LEVELS CALIBRATION
SUBWOOFER
R SR RR
ULTRA2 SUB
60Hz 60Hz
40Hz
BGC
C
ASA
60Hz
M
L SL RL
SUB
40Hz 40Hz 60Hz 60Hz
Note:
When the SUBWOOFER parameter is set to NONE, subwoofer signals will
not be redirected if the 5.1a BYPASS listening mode is activated. Use the
associated DVD-A/SACD player to configure the speaker setup to redirect
subwoofer signals .
JBL Performance
SUBWOOFER
FULL
40 Hz
30 Hz
60 Hz
40 Hz
60 Hz
60 Hz 50 Hz
40 Hz 60 Hz
OFF 70 Hz
N/A 80 Hz
APART 80 Hz
90 Hz
100 Hz
110 Hz
120 Hz