JBL Performance AV1 User Manual page 72

Setup
THX SPEAKER SETUPS
(continued)
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
REAR L/R
SETUP SPEAKERS THX SETUP
Opens the THX REAR SPEAKERS menu, which is used to activate
and deactivate the audio output connectors labeled Rear L/R. When
set to THX 80Hz, the AV1 activates these connectors and configures
all audio output connectors for a 7.1-channel THX speaker setup.
When set to NONE, the AV1 deactivates these connectors and con-
figures the other audio output connectors for a 5.1-channel THX
speaker setup.
Note:
When the REAR L/R parameter is set to NONE, Dolby Digital Surround EX,
THX Ultra2, THX Surround EX and DTS-ES decoding are not available,
and the ASA parameter is unavailable.
3-34
SETUP SPEAKER SETUP
INPUTS CUSTOM SETUP
SPEAKERS THX SETUP
REAR PANEL CONFIG SPEAKER DISTANCES
DISPLAYS LEVELS CALIBRATION
VOLUME CONTROLS
TRIGGER
40Hz
LOCK OPTIONS
60Hz
M
SUB
40Hz 40Hz
THX 80HZ, NONE
REAR L /R
THX SPEAKER SETUP
!CAUTION!
PRESSING THE
BUTTON WILL
AUTOMATICALLY CHANGE
THE OUTPUTS TO A THX
R SR RR
SPEAKER
60Hz 60Hz
CONFIGURATION
C
L SL RL
60Hz 60Hz
The THX SETUP menu THX ULTRA2 SUB, BGC and ASA parameters
are identical to the CUSTOM SETUP menu THX ULTRA2 SUB, BGC
and ASA parameters. When one of these parameter settings is
adjusted on one menu, it is automatically adjusted on the other
menu at the same time. See pages "THX ULTRA2 SUB", "BGC" and
"ASA" on page 3-32 for these parameter descriptions.
JBL Performance
THX SETUP THX REAR SPEAKERS
FRONT L/R* 40 Hz THX 80Hz
CENTER* 60 Hz NONE
SIDE L/R* 60 Hz
REAR L/R 60 Hz
SUBWOOFER* 40 Hz
ULTRA2 SUB OFF
BGC N/A
ASA APART
* These parameters cannot be
adjusted.