JBL Performance AV1 User Manual page 52

Setup
SELECTING PREFERRED LISTENING MODES
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
2-CH
DVD1 2-CH
SETUP INPUTS
Opens the 2-CH MODE menu shown, which selects a preferred lis-
tening mode for 2-channel input sources. The AV1 automatically
activates the selected listening mode whenever a new input is
selected or a new 2-channel source is present. When set to USE
LAST, the AV1 activates the listening mode that was activated the
last time a 2-channel source was present.
3-14
(continued
SETUP INPUT SETUP
INPUTS DVD1
SPEAKERS DVD2
REAR PANEL CONFIG SAT
DISPLAYS VCR
VOLUME CONTROLS TV
TRIGGER CD
LOCK OPTIONS TUNER
AUX
DVD1 INPUT SETUP DVD1 2-CH MODE
NAME FILM
DVD1
DIGITAL IN TV
COAX-1
ANALOG IN
MUSIC
NONE
ANLG IN LVL
MUSIC SURR
AUTO
VIDEO IN PLII MOVIE
S-VIDEO-1
COMPONENT IN PLII MUSIC
1
2-CH PLII +
FILM
PRO LOGIC
D 5.1 FILM
PL +
FILM
ADVANCED NIGHTCLUB
CONCERT HALL
CHURCH
CATHEDRAL
PANORAMA
PARTY
2-CHANNEL
MONO LOGIC
MONO SURROUND
MONO
USE LAST
When the 2-CH parameter is set to USE LAST:
• The AV1 will not automatically activate the 2-CHANNEL listen-
ing mode if the remote control 2 CH button was used to acti-
vate the 2-CHANNEL listening mode the last time a 2-channel
source was present. Instead, it will activate the 2-channel listen-
ing mode (for example, L7 FILM) that was activated prior to the
2-CHANNEL listening mode.
• The AV1 will automatically activate a DTS Neo:6 listening mode
if a DTS Neo:6 listening mode was activated the last time a 2-
channel source was present. However, the DTS Neo:6 listening
modes cannot be selected as the preferred listening mode for
2-channel sources.
• The AV1 will not automatically activate a DTS Neo:6 listening
mode unless a 44.1kHz or 48kHz PCM digital source is present.
The DTS Neo:6 listening modes are not available with 88.2kHz
or 96kHz, Dolby Digital or analog sources.
JBL Performance