Documentation Conventions - JBL Performance AV1 User Manual

Introduction

DOCUMENTATION CONVENTIONS

This document contains general safety, installation and operation instructions for the AV1 Digital Controller. It is important to read this user
guide before attempting to use the product. Pay particular attention to safety instructions.
The following symbols are used in the document:
Appears on the component to indicate the pres-
ence of uninsulated, dangerous voltage inside
the enclosu
constitute a risk of shock.
Appears on the component to indicate impor-
tant operating and maintenance instructions in
the accompanying literature.
Calls attention to a procedure, practice, condi-
WARNING
tion or the like that, if not correctly performed
or adhered to, could result in injury or death.
Calls attention to a procedure, practice, condi-
CAUTION!
tion or the like that, if not correctly performed
or adhered to, could result in damage or
destruction to part or all of the product.
Note: Calls attention to information that is essential to
highlight.
This document uses the term DTS(-ES) to indicate that DTS-ES encoding may or may not be present in the input source.
ii
r æ
e voltage that may be sufficient to
SETUP INPUTS DVD1 NAME
Represents a menu path. The menu items in gray boxes must be
selected with the remote control Menu
menu or menu item in the black box. For instance, the SETUP,
INPUTS, and DVD1 menu items must be selected to open the
DVD1 INPUT SETUP menu.
The DVD1 INPUT SETUP menu is used here as an example and will
continue to be used as an example throughout this document.
Whenever it appears, any other INPUT SETUP menu may be substi-
tuted. Likewise, whenever the DVD1 input appears as a step in a
menu path, any other input may be substituted.
JBL Performance
EDIT INPUT NAME
arrow to access the