JBL Performance AV1 User Manual page 65

AV1
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
CENTER
FULL, 30Hz TO 120Hz, THX 80Hz, NONE
SETUP SPEAKERS CUSTOM SETUP
Opens the CENTER SPEAKER menu, which is used to select a cross-
over point for the audio output connector labeled Center. When set
to FULL, the AV1 sends a full-range audio output signal to this con-
nector. Otherwise, the AV1 activates a crossover point at the
selected setting. Choose the setting closest to the low-frequency
rating of the associated speaker. When set to NONE, the AV1 redi-
rects center channel signals to the audio output connectors labeled
Front L/R.
SETUP SPEAKER SETUP
INPUTS CUSTOM SETUP
SPEAKERS THX SETUP
REAR PANEL CONFIG SPEAKER DISTANCES
DISPLAYS LEVELS CALIBRATION
VOLUME CONTROLS
TRIGGER
LOCK OPTIONS
M
SUB
40Hz
CENTER
CUSTOM SETUP
FRONT L/R
CENTER
SIDE L/R
REAR L/R
SUBWOOFER
R SR RR
ULTRA2 SUB
60Hz 60Hz
40Hz
BGC
C
ASA
60Hz
L SL RL
40Hz 60Hz 60Hz
Note:
When the CENTER parameter is set to NONE, center channel signals will
not be redirected if the 5.1a BYPASS listening mode is activated. To redi-
rect center channel signals, configure the speaker setup with the associ-
ated DVD-A/SACD player.
CENTER SPEAKER
40 Hz FULL
60 Hz 30 Hz
40 Hz
60 Hz
50 Hz
60 Hz
40 Hz 60 Hz
OFF 70 Hz
N/A 80 Hz
APART 80 Hz
90 Hz
100 Hz
110 Hz
120 Hz
Setup
3-27