End Time; Time; Childproof Lock - Siemens HB23.B..0 Series Instruction Manual

End time

The oven allows you to set the time when you want the food
ready. The oven switches on automatically and switches off at
the set time. E.g. the food may be placed in the oven in the
morning and the oven set so that it is ready at midday.
Please ensure that the food will not go off if it is in the oven for
too long.
Example in the picture: It is now 10:30 AM, the cooking time is
45 minutes and the oven should switch off at 12:30 PM.
Set the function control knob.
1.
Set the temperature control knob.
2.
Press the button twice.
0
3.
Set the cooking time with the
4.
Press the 0 button.
5.
The arrow is located in front of the
N
will be ready is displayed.
Delay the end time using the buttons
6.
The oven displays the programmed time after a few seconds
and is set to standby. The time when the dish will be ready is
displayed and the arrow
N
The symbols and turn off. When the oven is turned on,
V 0
the cooking time progress is displayed and the arrow
front of the symbol . The symbol
x

Childproof lock

The oven includes a childproof lock to prevent it being turned
on accidentally.
The oven does not react to any setting. The timer and time can
be programmed when the childproof lock is on.
When the heating type and temperature or grill level are
programmed, the childproof lock turns off the heating.
8
or buttons.
@ A
. The time the dish
y
@ or A .
is shown in front of the
y
switches off.
y
The cooking time has finished
A beep will sound. The oven will stop heating. The display
panel will show
cooking time with the
twice and turn the function control knob to the zero setting. The
oven is off.
Changing the end time
Change the end time using the buttons
shown after a few seconds. If the timer has been programmed,
first press the
cooking time has already started to count down. The final result
may not be the same.
Cancelling the end time
Reset the end time to the current time by pressing
time is shown after a few seconds. The oven switches on. If the
timer has been programmed, first press the
Viewing the time settings
If several time functions are programmed, the corresponding
symbols light up on the display panel. The arrow
front of the time function in the foreground.
To view the timer
the actual time
arrow reaches the required symbol. The corresponding value
N
will be shown for a few seconds on the display panel.

Time

Once the oven has been connected or after a power cut, the
symbol and three zeros are shown on the display panel. Set
0
the time.
Press the
0
1.
The display panel displays the time
Adjust the time with the buttons
2.
The programmed time is displayed after a few seconds.
Changing the time
No other time function can be programmed.
Press the
0
1.
On the display, the time symbols light up, the arrow
front of the
Adjust the time with the buttons
2.
symbol.
The programmed time is displayed after a few seconds.
is in
N
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Activating the childproof lock
No cooking time or end time should already be set.
Press the
h
The display panel shows the
now activated.
Turning off the childproof lock
Press the
h
The @ symbol on the display panel goes off. The childproof
lock is now deactivated.
: . Press the button. Programme a new
‹ ‹‹ 0
or buttons. Or press the
@ A
button twice. Do not change the end time if the
0
, the cooking time
V
, press the button
0 0
button.
‚ƒ
or
@
button four times.
0 .
or
@
button for approximately four seconds.
symbol. The childproof lock is
@
button for approximately four seconds.
button
0
@ or A . The new time is
A . The new
button twice.
0
symbol is in
N
, the end time or
x y
repeatedly until the
.
‹‹
.
A
N is in
.
A