Fueling - X-TREME XG-499 Product Handbook

1.
Using an adjustable wrench, turn the screw counter-clockwise to loosen
2. Install the fuel tank and tank shield onto the mounting bracket.
clockwise to firmly attach the tank. (Fig.2).
3.
Run the fuel lines directly behind the tube with the slot. (Fig.3).
4. Make sure the two fuel lines connect to the engine correctly.

Fueling

This is a two-stroke engine.
Only run the engine using a mixture of gasoline and 2-cycle engine oil.
PLEASE READ OPERATING PROCEDURES BEFORE FUELING!
1. Mix fuel (minimum 90 octane) and 2-cycle engine oil in separate container. Use
Tanaka Perfect Mix or a quality 32:1 2-cycle oil. Make sure the fuel is well mixed by
shaking the container
2. Make sure that the engine is off!
Page9
.
(Fig1.).
Turn screws