Table of Contents
Advertisement
REMOVING THE LINE FUSE HOLDER AND
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug microwave oven or disconnect
power.
2.
Remove the control panel from the oven
(see page 4-14 for the procedure).
THE MAGNETRON THERMOSTAT
Magnetron Thermostat
Line Fuse Holder
3.
To remove the line fuse holder:
a) Remove the line fuse from the fuse
holder.
b) Disconnect the two wire connectors
from the fuse holder terminals.
BK and RD
Wires
c) Remove the screw from the fuse holder
and remove the holder from the oven.
Fuse Holder Screw
4.
To remove the magnetron thermostat:
a) Disconnect the two wires from the mag-
netron thermostat terminals.
b) Remove the screws from the magnetron
thermostat and remove the thermostat.
WH and GY Wires
4-
Line Fuse
WH Wire
Magnetron
Thermostat
Screws
WH Wire
Advertisement
Table of Contents
