Tv Screen And Video; Sound - Panasonic DMR-BW880 Operating Instructions Manual

TV screen and video

Screen size is wrong.
Check the "TV Aspect" or "Aspect for 4:3 Video". (
Adjust the aspect ratio setting on TV. Refer to your TV's
operating instructions.
If the 16:9 aspect ratio image is output to a 4:3 TV and
the image will be stretched vertically, set "TV Aspect" to
4:3. ( 80)
Check "Aspect for Recording" before recording or file
conversion. ( 76)
If you connect to 4:3 TV, set "HDMI Video Format" to
"576p/480p". ( 80)
Pictures do not appear with the HD quality
although HD setting was made.
The pictures are output with 576p/480p depending on the
programme.
The screen changes automatically.
If there is no operation for 5 minutes or more, the
displayed screen switches to the other states
automatically (only when the "Screen Saver" is set to
"On"). ( 79)
There is a lot of image lag when playing
video.
Set "HD optimizer" in the Picture menu to "Off". (
Set "Audio Delay". (
80)
The images from this unit do not appear on
the TV.
The picture is distorted during play, or video
will not play correctly.
Check the connection and the TV's input settings.
The unit's "TV System" setting differs from the TV system
used by the disc now playing. While stopped, keep
pressing [∫] and [< OPEN/CLOSE] on the main unit for
5 or more seconds. The system switches from PAL to
NTSC or vice versa. (
Picture may not be seen when more than 4 devices are
connected with HDMI cables.
Reduce the number of connected devices.
The picture may be distorted or a black screen may
appear between scenes recorded with different aspect
ratios.
DVD-R DL and +R DL discs have two writable layers on
one side. Video and audio may momentarily cut out when
the unit is switching layers.
Set "Deep Colour Output" or "Contents Type Flag" to
"Off". ( 80, 81)

Sound

No sound.
Distorted sound.
Check the connections or amplifier's settings. (
Press [AUDIO] to select the audio. (
To output audio from a device connected with an HDMI
cable, set "HDMI Audio Output" to "On". (
Cannot switch audio.
You cannot switch the audio if "Digital Audio Output" is
set to "Bitstream" (
79)
80)
22, 37)
80)
78)
71)
12, 15)
89
VQT2X37