To Confirm And Edit A Timer Programme - Panasonic DMR-BW880 Operating Instructions Manual

Timer recording
To confirm and edit a timer
programme
Press [PROG/CHECK].
Timer Recording HDD 30:30 DR
Channel Name
Schedule
01/08 FRI
01/08 FRI
FRI
01/08 FRI
New Timer Programme
Total 3/64 Delete
OK
Turn
RETURN
Timer Off
To exit the timer recording list
Press [PROG/CHECK].
≥ Failed programmes are deleted from the timer recording list at 4 a.m.
two days later.
Screen icons
Red: Timer recording standby is activated.
F
Grey: Timer recording standby is deactivated.
Currently recording programme
[
Part or all of the programme will not be recorded
since the programme is overlapping.
The disc was full.
Copy-protected programme
It was not recorded.
The programme did not complete recording
because of some reason.
Auto Renewal Recording is set (
OK Displayed if the recording can fit in the remaining
space
>
Daily or weekly timer programme is set. (up to a
maximum of one month from the present time)
(Date)
! It may not be possible to record because:
– there is not enough space left.
– the number of possible titles has reached its
maximum. (
– programmes are deactivated.
30
VQT2X37
2010/01/01 FRI 23:05
Icons
Space
Drive/Mode
HDD
OK
DR
HDD
OK
DR
-->
HDD
01/31
DR
HDD
DR
Info
Page Up
Page Down
28).
101)
To show a programme information
Press [STATUS ].
Additional information is available for these programmes.
To deactivate a timer programme
Select the programme, then press the "Red"
button.
≥The timer icon "F" ( left) will change from red to grey.
≥Press the "Red" button again to activate timer recording
standby. (The timer icon "F" will change to red.)
To change a timer programme
1 Select the programme, then press [OK].
2 Go to step 3 on page 28.
To delete a timer programme
Select the programme, then press [DEL].