Panasonic DMR-BW880 Operating Instructions Manual page 67

Home Network ( DLNA ) Settings
When DLNA Function is deactivated, make the following
settings.
1 While stopped
Press [SETUP].
2 Select "Network", then press [OK].
3 Select "Network Settings", then press [OK].
4 Select "Home Network ( DLNA ) Settings", then press
[OK].
5 Select "Home Network ( DLNA ) function", then press
[OK].
6 Select "On", then press [OK].
Home Network ( DLNA ) Settings
Home Network ( DLNA ) function
Setting device name
Registration type for remote devices
Remote device list
OK
RETURN
≥"Power Save in Standby" in the Setup is fixed to "Off".
( 82)
7 Select "Registration type for remote devices", then press
[OK].
8 Select "Automatic" or "Manual", then press [OK].
Automatic All connected devices on the same
network can access this unit.
Manual Only registered devices can access
this unit.
To register equipment manually
After selecting "Manual" in step 8 (
1 Select "Remote device list", then press [OK].
2 Select the device name or the MAC Address for the
3 Select "Yes", then press [OK].
To deregister equipment
After selecting "Manual" in step 8 (
1 Select "Remote device list", then press [OK].
2 Select the registered equipment, then press [OK].
3 Select "Yes", then press [OK].
To change this unit's name
On
After performing step 6 (
Automatic
1 Select "Setting device name", then press [OK].
2 Select "Select from a preset list" or "Create name", then
3 Select from a preset list
≥ The maximum number of equipment that can be registered is 16.
≥ Ensure that the router for your home network has adequate security
device you want to register, then press [OK].
left)
press [OK].
Select the preset name, then press [OK].
Create name
Enter the name. ( 69, Entering text)
system to prevent unauthorized access.
left)
left)
67
VQT2X37