To Confirm And Edit A Timer Programme - Panasonic DMR-HWT250 Operating Instructions Manual

Hide thumbs Also See for DMR-HWT250:
Table of Contents

Advertisement

Recording
Timer recording
To confirm and edit a timer
programme
1
Press [PROG/CHECK].
e.g.,
Timer Recording
HDD
Channel Name
Guide
Guide
New Timer Programme
Total 3/32
OK
Turn
RETURN
Timer Off
2
Select the programme, then perform the
operations.
To deactivate a timer programme
Press the red button.
• The timer icon "F" will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon "F" will
change to red.)
To delete a timer programme
Press [DELETE].
To resolve an overlap timer programme
Press the green button.
• The overlapped timer recording list will
appear. (
29)
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to "Timer recording options".
(
30)
3 Press [OK].
To show programme information
Press [STATUS
To exit the timer recording list
Press [EXIT
].
32
SQT0816
30:30 DR
TUE 06.01.2015 8:05 AM
Space
Schedule
Mode
TUE 14.01
OK
DR
11:00 AM - 11:45 AM
TUE 14.01
HG
OK
10:00 AM - 11:50 AM
TUE 14.01
DR
11:30 AM - 1:00 AM
TUE 14.01
DR
8:00 AM - 10:45 AM
Info
Delete
Page Up
Resolve overlap
Page Down
].
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
Currently recording programme
[
A part or all of the programme will not be
recorded since the programme is
overlapping.
• Programme overlapping can be resolved
with repeat programme if available.
Select the programme, then press the
green button.
(
29, If "Overlapped Timer Recording"
screen appears)
• This function is not available for the timer
programmes that were set manually.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set. (
Guide Link (
30)
Guide
Series Timer Recording (
OK
Displayed if the recording can fit in the
remaining space
Daily or weekly timer programme is set.
(Date)
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has reached
its maximum. (
- programmes are deactivated, etc.
30)
29)
7)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents