Use Original Accessories; Prior To Initial Use; Initial Operation - Silvercrest DGS 800 Operation And Safety Notes

Safety / Prior to Initial Use / Initial Operation
lead to an overheating of the appliance.
Damage of the appliance is the consequence.
Never immerse the appliance in water and
always pull the mains plug before cleaning or
transporting it.
Avoid the hazard of
life by electric shock:
Make sure that the details on the rating label
are in conformity with your mains voltage.
Only connect the unit to alternating current.
Do not at all operate this unit with an external
timer or a separate telecontrol system.
Check the power cord
for damage or deterioration.
Do not operate the appliance when the power
cord 18 or the mains plug is damaged.
ATTENTION! A damaged power cord
presents a hazard of life by electric shock.
Have appliances, which do not work faultlessly
or which are damaged, immediately and only
checked and repaired by the after-sales service.
Do not use the power cord
the appliance. Keep the power cord away
from hot surfaces, sharp edges and mechanical
forces. Damaged or entangled cords
crease the risk of an electric shock.
Do not operate the appliance outside. Never
let the power cord
18
during operation.
Unplug the power cord
operating the appliance.

Use Original Accessories

Only use accessories and additional equipment
stated in the instruction manual. The use of other
products or accessories than recommended in the
instruction manual may present a risk of injuries
for you.
8 GB/IE/CY
regularly
18
18
18 for unplugging
in-
18
become wet or damp
18 when you are not

Prior to Initial Use

Clean all detachable parts prior to the initial use
with warm soapy water and dry them carefully.
Wipe the interior of the base of the appliance /
water tank with a damp cloth.
10

Initial Operation

Observe the mains voltage. The mains voltage of
the power source must be in conformity with the
details on the rating label of the appliance. Appli-
ances declared with 230 V can also be operated
with 220 V.
Place the base of the appliance
ble, even surface.
Then place the black turbo ring
heating element mounted in the centre.
11
Make sure that the larger side faces down-
wards.
Now fill the base of the appliance / water tank
10 with cold water up to the MAX mark
Note: Consider that the base of the appliance /
water tank has to be filled with water at
10
least up to the MIN mark
ATTENTION! HAZARD OF BURNS!
Make sure that the water does not exceed the
MAX mark 19 . Otherwise, hot water may spurt
out of the appliance during operation.
ATTENTION! Do not add anything like sea-
sonings etc. to the water. This may affect the
steam flow and / or damage the surface of the
base of the appliance / water tank
heating element 11 .
Now place the black condensate collection
basin 7 onto the base of the appliance
Make sure that the semi-circular elevation
points to the front towards the keypad and is
level. Thus, the turbo ring
position.
Place the food in the steam trays
Ensure that all parts are positioned correctly
before switching on the appliance.
ATTENTION! Never use bowls or other
parts, not especially produced for this appli-
ance. Otherwise, there may be the risk of inju-
on a sta-
10
8 onto the
19 .
9 .
and the
10
10 .
8 will be kept in
, , .
3 4 6