Phonebook; Base Unit/Handset Phonebook - Panasonic KX-TG1061C Operating Instructions Manual

TG106xC(e).book Page 16 Wednesday, February 25, 2009 11:13 AM

Phonebook

Base unit/handset
phonebook
The phonebook allows you to make calls without
having to dial manually. You can add names and
phone numbers to the base unit and handset
phonebook independently, and assign each
phonebook entry to the desired group.
– Base unit: up to 100 entries
– Handset: up to 100 entries
Adding entries
= Base unit / Y Handset
1
{C}i {ADD}
2
Enter the party's name (16 characters max.).
i {OK}
3
Enter the party's phone number (24 digits
max.). i {OK}
4
{V}/{^}: Select the desired group. i
{SELECT} 2 times
L To add other entries, repeat from step 2.
5
Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Note:
L Handset only: If you do not press any dial key
within 5 seconds after entering a character, the
character is fixed and the cursor moves to the
right.
L Call Display subscribers can use group ringer
tone feature (page 28).
Character table for entering names
Key Character
Space # &
{1}
– . / 1
a b c A
{2}
d e f D
{3}
g h i G
{4}
j k l J
{5}
m n o M
{6}
p q r s
{7}
t u v T
{8}
w x y z
{9}
16
Key
{0}
{8}
*2
{V}
{7}
*2
{^}
*1 Base unit only
*2 Handset only
L To enter another character that is located on the
same dial key:
Base unit: Press {8} to move the cursor to the
next space.
Handset: Press {V} to move the cursor to the
next space.
Correcting a mistake
1
Proceed with the operation for your unit.
Base unit: Press {7} or {8} to move the
cursor to the character or number you want to
erase.
Handset: Press {^} or {V} to move the cursor
to the character or number you want to erase.
2
Press {CLEAR}, and then enter the
appropriate character or number.
L Press and hold {CLEAR} to erase all
Groups
Groups can help you find entries in the phonebook
quickly and easily. When adding an entry to the
phonebook, you can assign it to one of 9 groups.
You can change the names of groups assigned for
phonebook entries ("Friends", "Family", etc.) and
then search for phonebook entries by group. The
group ringer tone feature is available for Call
Display subscribers (page 28).
Changing group names
' ( ) ; ,
The default group name is "Group 1" to "Group
9".
B C 2
= Base unit / Y Handset
E F 3
1
{C} i {MENU}
H I 4
2
{V}/{^}: "Group" i {SELECT}
K L 5
3
{V}/{^}: Select the desired group. i
N O 6
{SELECT}
P Q R S 7
4
{V}/{^}: "Group name" i {SELECT}
U V 8
W X Y Z 9
Character
Space 0
*1
To move the cursor to the right
*1
To move the cursor to the left
characters or numbers.