TG106xC(e).book Page 8 Wednesday, February 25, 2009 11:13 AM
Getting started
Setting up
Connections
L Use only the supplied Panasonic AC adaptor
PQLV219.
■ Base unit
*For DSL/ADSL service users
■ Charger
(120 V AC, 60 Hz)
8
Battery installation
L USE ONLY Ni-MH batteries AAA (R03) size.
L Do NOT use Alkaline/Manganese/Ni-Cd
batteries.
L Confirm correct polarities (S, T).
Important:
L If the handset does not automatically turn on
after installing/replacing batteries, place the
handset on the charger.
Battery charge
Charge for about 7 hours.
L When the batteries are fully charged, the charge
indicator goes off.
Hooks
Rechargeable Ni-MH ONLY
Confirm "Charging"
is displayed.