Phonebook - Panasonic KX-TGD432 Operating Instructions Manual

Phonebook

You can add 100 names (16 characters max.)
and phone numbers (24 digits max.) to the
phonebook.
Adding phonebook entries
1
MFN W a MMENUN
2
MbN: "Add new entry" a MSELECTN
3
Enter the party's name. a MOKN
4
Enter the party's phone number. a MOKN
5
MbN: Select the desired group. a
MSELECTN 2 times a MOFFN
Note:
R In step 3, you can switch the language for
entering characters.
# a MbN: Select the desired language. a
MOKN
Entering characters
Press the dial key that corresponds to the
desired character. Press repeatedly to scroll
through the available characters.
The following operations are also available.
Key Operation
* Switch between the
uppercase and lowercase
(A « a)
MFN MEN Move the cursor
MCLEARN Erase the character or number
R To erase all, press and
hold it.
R To enter another character that is located
on the same dial key, first press MEN to
move the cursor to the next space.
R If you do not press any dial key within 2
seconds after entering a character, the
character is fixed and the cursor moves to
the next space.
For assistance, please visit http://shop.panasonic.com/support
TGD43x̲(en-en)̲0222̲ver004.pdf 17
Storing a redial list number to the
phonebook
1
MEN REDIAL
2
MbN: Select the desired entry. a MSAVEN
3
To store the name, continue from step 3,
"Editing entries", page 18.
Note:
R The name stored in the phonebook will be
reflected in the redial list after you make a
call using that phonebook entry.
Storing caller information to the
phonebook
1
MCN CID
2
MbN: Select the desired entry. a MMENUN
R To edit the number: MbN: "Edit" a
MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the desired
format. a MSAVEN a MbN:
"Phonebook" a MSELECTN a Go
to step 4.
3
MbN: "Save phonebook" a MSELECTN
4
Continue from step 3, "Editing entries",
page 18.
Groups
You can assign your phone entries to groups
for each searching. You can assign a ringer
tone to each group to help identify incoming
calls (Caller ID required).
Changing group names/setting ringer
ID
1
MFN W a MMENUN
2
MbN: "Group" a MSELECTN
3
MbN: Select the desired group. a
MSELECTN
4
To change group names
MbN: "Group name" a MSELECTN a
Edit the name. a MSAVEN
To set group ringer tone
Phonebook
17
2018/02/22 8:14:42