Download  Print this page

Special Programming - Panasonic KX-TG1061C Operating Instructions Manual

Expandable digital corded/cordless answering system.
Hide thumbs

Advertisement

TG106xC(e).book Page 25 Wednesday, February 25, 2009 11:13 AM

Special programming

Night mode
Night mode allows you to select a period of time
during which the base unit and/or handset will not
ring for outside calls. This feature is useful for time
periods when you do not want to be disturbed, for
example, while sleeping. Night mode can be set
independently for each base unit and handset.
Important:
L Set the date and time beforehand (page 12).
L Handset only: If you have set the alarm, the
alarm sounds even if the night mode is turned
on.
Turning night mode on/off
= Base unit / Y Handset
1
{MENU} i {#}{2}{3}{8}
2
{V}/{^}: Select "On" or "Off". i {SAVE}
L If you select "Off", press {■} (EXIT) on the
base unit or {OFF} on the handset to exit.
3
Enter the desired hour and minute you wish to
start this feature.
4
{AM/PM}: Select "AM" or "PM". i {OK}
5
Enter the desired hour and minute you wish to
end this feature.
6
{AM/PM}: Select "AM" or "PM".
7
{SAVE}
8
Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
L When the night mode is set, 3 is
displayed.
Note:
L To correct a digit, proceed with the operation for
your unit.
Base unit: press {7} or {8} to move the
cursor to the digit, then make the correction.
Handset: press {^} or {V} to move the cursor to
the digit, then make the correction.
Changing the start and end time
1
{MENU} i {#}{2}{3}{7}
2
Continue from step 3, "Turning night mode
on/off", page 25.
Alarm
An alarm sounds at the set time for 3 minutes once
or daily. Alarm can be set for each handset.
Important:
L Set the date and time beforehand (page 12).
Y Handset
1
{MENU} i {#}{7}{2}{0}
2
{V}/{^}: Select the desired alarm option. i
{SELECT}
Turns alarm off. Go to step 6.
Off
An alarm sounds once at the set
Once
time.
An alarm sounds daily at the set
Daily
time. Go to step 4.
3
Enter the desired month and date. i {OK}
4
Set the desired time. i {OK}
5
{V}/{^}: Select the desired ringer tone. i
{SELECT}
L We recommend selecting a ringer tone
different from the ringer tone set for outside
calls.
6
{SELECT} i {OFF}
L When the alarm is set, E is displayed.
Note:
L To stop the alarm, press any dial key or place
the handset on the charger.
L When the handset is in use, the alarm will not
sound until the handset is in standby mode.
L If you select "Once", the setting changes to
"Off" after the alarm sounds.
Programming
25

Advertisement

Table of Contents

   Related Manuals for Panasonic KX-TG1061C

This manual is also suitable for:

Kx-tg1062c

Comments to this Manuals

Symbols: 0
Latest comments: