Phonebook - Panasonic KX-TGD890C Operating Instructions Manual

Phonebook

You can add 100 names (16 characters max.)
and phone numbers (24 digits max.) to the
phonebook, and assign each phonebook entry
to the desired group (page 31).
Important:
R All entries can be shared by any registered
handset.
Adding phonebook entries
1
MFN W a MMENUN
2
MbN: "Add new entry" a MSELECTN
3
Enter the party's name. a MOKN
4
Enter the party's phone number. a MOKN
5
MbN: Select the desired group. a
MSELECTN 2 times a MOFFN
Entering characters
Press the dial key that corresponds to the
desired character. Press repeatedly to scroll
through the available characters.
The following operations are also available.
Key Operation
* Switch between the
uppercase and lowercase
(A « a)
MFN MEN Move the cursor
MCLEARN Erase the character or
number
R To erase all, press and
R To enter another character that is located
on the same dial key, first press MEN to
move the cursor to the next space.
R If you do not press any dial key within 2
seconds after entering a character, the
character is fixed and the cursor moves to
the next space.
For assistance, visit www.panasonic.ca/english/support
hold it.
Storing a redial list number to the
phonebook
Phone numbers of up to 24 digits can be
stored in the phonebook.
1
MEN REDIAL
2
MbN: Select the desired entry. a MSAVEN
3
To store the name, continue from step 3,
"Editing entries", page 32.
Note:
R The name stored in the phonebook will be
reflected in the redial list after you make a
call using that phonebook entry.
Storing caller information to the
phonebook
1
MCN CID
2
MbN: Select the desired entry. a MMENUN
R To edit the number:
MbN: "Edit" a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the desired
format. a MSAVEN a MbN:
"Phonebook" a MSELECTN a Go
to step 4.
3
MbN: "Save phonebook" a MSELECTN
4
Continue from step 3, "Editing entries",
page 32.
Groups
Groups can help you find entries in the
phonebook quickly and easily. You can
change the names of groups assigned for
phonebook entries ("Friends", "Family", etc.).
By assigning different ringer tones for different
groups of callers, you can identify who is
calling (ringer ID), if you have subscribed to
Caller ID service.
Changing group names/setting ringer
ID
The default group name is "Group 1" to
"Group 9".
1
MFN W a MMENUN
Phonebook
31