Speed Dial - Panasonic KX-TG1061C Operating Instructions Manual

TG106xC(e).book Page 18 Wednesday, February 25, 2009 11:13 AM
Phonebook
2
{V}/{^}: Select the desired entry.
3
Press {CALL} to dial the number.
Note:
L When storing a calling card access number and
your PIN in the phonebook as one phonebook
entry, press {PAUSE} to add pauses after the
number and PIN as necessary (page 13).
L If you have rotary/pulse service, you need to
press {*} before pressing {C} in step 1 to
change the dialing mode temporarily to tone.
When adding entries to the phonebook, we
recommend adding {*} to the beginning of
phone numbers you wish to chain dial (page 16).

Speed dial

You can assign 1 phone number from the
phonebook to each of the 5 speed dial buttons.
= Base unit
Assigning a phonebook entry to a speed dial
button
1
Find the desired entry (page 17).
2
Press the speed dial button you want to
assign to. i {SELECT}
L If "Overwrite" is displayed, the button
you selected has a phone number already
assigned to it.
To overwrite with the currently selected
phone number, go to step 3.
To select another button, press {BACK},
then repeat this step.
3
{SELECT} i {■} (EXIT)
Note:
L In step 2, you can also press {MENU}. i
{V}/{^}: "Speed dial" i {SELECT} i
{V}/{^}: Select the desired speed dial button.
i {SELECT}
L If a speed dial button has already been
assigned, "Q" is displayed next to the button in
step 2.
Making a call using a speed dial button
1
Press the desired speed dial button.
2
Lift the corded handset.
18
Note:
L In step 1, if no phone number is stored to the
speed dial button, you can assign a number by
pressing {C} and continue from step 1,
"Assigning a phonebook entry to a speed dial
button", page 18.
Cancelling a speed dial assignment
1
Press the desired speed dial button. i
{ERASE} (soft key)
2
{V}/{^}: "Yes" i {SELECT}
Index card
Use the index card to record the names/phone
numbers stored to the speed dial buttons.