Table of Contents
Advertisement
TG106xC(e).book Page 28 Wednesday, February 25, 2009 11:13 AM
Call Display Service
Using Call Display service
Important:
L This unit is Call Display compatible. To use Call
Display features, you must subscribe to a Call
Display service. Contact your service provider/
telephone company for details.
Call Display features
When an outside call is being received, the caller's
name and phone number are displayed.
Caller information for the last 50 callers is logged in
the caller list from the most recent call to the
oldest.
L If the unit cannot receive caller information, the
following is displayed:
– "Unavailable Name & No.": The caller
dials from an area which does not provide a
Call Display service.
– "Private caller": The caller requests not
to send caller information.
– "Long distance": The caller makes a long
distance call.
L If the unit is connected to a PBX system, caller
information may not be properly received.
Contact your PBX supplier.
Missed calls
If a call is not answered, the unit treats it as a
missed call. The display shows "Missed call".
This lets you know if you should view the caller list
to see who called while you were away.
Phonebook name display
When caller information is received and it matches
a phone number stored in the phonebook, the
stored name in the phonebook is displayed and
logged in the caller list.
Group ringer tone for phonebook
This feature can help you identify who is calling by
using different ringer tones for different groups of
callers. When adding an entry to the phonebook,
you can assign it to the desired group (page 16).
When a call is received from a caller assigned to a
group, the group's ringer you selected rings after
the caller information is displayed. If you select
"No ringer ID" (default), the unit uses the
28
ringer tone you selected on page 23 when calls
from this group are received.
= Base unit / Y Handset
1
{C} i {MENU}
2
{V}/{^}: "Group" i {SELECT}
3
{V}/{^}: Select the desired group. i
{SELECT}
4
{V}/{^}: Select the current setting of the group
ringer tone. i {SELECT}
5
{V}/{^}: Select the desired entry. i {SAVE}
6
Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Caller list
Important:
L Only 1 person can access the caller list at a
time.
L Make sure the unit's date and time setting is
correct (page 12).
Viewing the caller list and calling
back
= Base unit / Y Handset
1
Proceed with the operation for your unit.
Base unit: {CID}
Handset: {MENU} i {V}/{^}: "Caller
list" i {SELECT}
2
Press {V} to search from the most recent call,
or {^} to search from the oldest call.
3
Proceed with the operation for your unit.
Base unit:
– To call back, lift the corded handset.
– To exit, press {■} (EXIT).
Handset:
– To call back, press {C}.
– To exit, press {OFF}.
Note:
L If the entry has already been viewed or
answered, "Q" is displayed, even if it was
viewed or answered using another unit.
Hide quick links:
Advertisement
Table of Contents
